Wireless RGB Led Controller

Input Voltage	12 Volts, DC
Rated load current	10A (All 3 Channels)
Maximum load	15A (All 3 Channels)
Output	3 X CMOS
Control Method	4 buttons, wireless control (11 modes, speed, On/Off) The RGB Controller is used to control RGB Led Strips. Includes handheld RF wireless remote control which can select 1 of 7 Static Modes or 1 or 4 Dynamic Color-Changing Modes with Speed and ON/OFF controls. Can drive up to 10 meters of RGB Led Strips, for longer runs use an RGB Amplifer. Powered by 12VDC power supplies sold separately.   Control method: Four buttons, wireless control Buttons (from top to bottom): MODE, UP, DOWN, ON/OFF Mode button: Press to advance to the next mode; Total of 11 modes Button-Up/Down: adjust the speed of colour change On/Off Button: Press to switch on or off   Modes: 1. Static red 2. Static green 3. Static Blue 4. Static Yellow (colour-mix) 5. Static Cyan (colour-mix) 6. Static purple (colour-mix) 7. Static White (colour-mix) 8. Colour cycle 9. Random flash cycle 10. Slow colour fading 11. Random colour changing   Note: This set cannot perform dimming, if you are looking for a dimmable wireless rgb led controller please check for LT-SYSTEM-3600RC. Remote control is based on RF technology; it can also work though walls!
Measurement	104 X 65 X 24 (mm)
Gross weight	300 grams

Note: This wireless LED Controller can drive 10 meters of RGB Led Strip lighting (colour changing) and includes an RF remote control. Requires additional switching mode power supply 12V.