***Flexible, Slim line, Ease of installation, Very long life***
The full colour rgb led strip series is a family of flexible, super high brightness LED strip lighting designed for use in interior applications.
Its small size, cool light output and modular design give it flexibility in installation into confined spaces such as pelmets, coffers and coves.
The 100 to 120 degrees wide angle beam ensures that the surface being illuminated is bright and even. The self adhesive backing tape (Brand: 3M) also lends itself for use in furniture, room and lighting/display design.
One meter of rgb led strip produces equivalent light output to a 35w halogen lamp. Using the appropriate led controller it is possible to adjust the brightness of the led without any flickering (not all led controllers are capable for led dimming).
Installation Tips:
The led strip may be cut to fit into installations if necessary. Cutting marks are printed on the ribbon and must be adhered to. The smallest workable segment of the RGB Strip is 100mm long and contains 3 full colours Led?s.
The Ribbon may be curved around small radii provided there are no LED components on the bend and the force does not crease the ribbon.
The Ribbon should be secured down immediately to avoid cyclic fatigue and breakage. Make sure you are grounded to remove any static electricity. Static electricity will damage the Leds and other Ribbon components!
Specification:
12mm SMD LIGHT STRIP (150-RGB LED), 5 METER REEL
PRINTED CIRCUIT BOARD THICKNESS: 0.25 mm
WORKING VOLTAGE: 12V DC
MAXIMUM LOAD CURRENT: 1A / 5 meters / channel (3 channels R, G, B)
Warning! Large file size. Depending on your connection, the page may be slow to open. Alternatively you can right click here and choose "Save Target As".
If you won't exceed 5 meters of RGB Led strip then you will need only one 4A (12V) switch mode power supply and an RGB Led controller which can also control the brighness of the led strip (dimming).
It is very simple to estimate the required power supply; please follow the example bellow:
RGB Led Strip consumes 0.6A (at 12V) per meter, suppose I need to calculate what power supply should I buy for driving 15meters of RGB strip: 15 X 0.6 = 9A
Of course in this case of 15 meters, I could use 2 X 7.5 meters RGB strips and connect the first one directly at my rgb led controller and for the second piece of 7.5 meters to use an RGB Led amplifier; so I would need a PSU (7.5 X 0.6= 4.5A) to connect the rgb controller and a second PSU of 4.5A to connect the second piece of 7.5 meters rgb strip at the amplifer.
Note that connecting an RGB led amplifier with the controller will require 4 cables from the controller to the amplifer; check rgb amplifer products into our website for more details on how to connect!
Question:
On the RGB Led controller page it says there is a control button for white colour; how do you get white from an RGB Led strip?
Product Brochure
