Dimmable RGB Led controller with R/F remote control
This is a multi function LED controller with high performance, adopted the most advanced PWM control technology. Its dedicated to control entire RGB color changes of LED lights with 4 wires (common anode), such as RGB LED module, LED strip, LED tape, LED wall washer, floodlight, LED under water lamp and other LED lights.
---------------------------------------------------------------------------------------------------------
WIRELESS LED RGB CONTROLLER WITH DIMMER
Using the appropriate led controller it is possible to adjust the brightness of the led without any flickering effect. Not all led controllers are capable for led dimming; proper dimming for led lighting (avoiding led colour shift) can only be done by pulse width modulation based controllers.
This is a full colour multi-functional rgb led controller based on PWM technology and designed to control colour changing combinations of LED strip lighting with 4-pin 3-loop cables (common anode). It can be adjusted through manual buttons or matching remote control device. Also this unit can run as a standalone controller or linked with an rgb amplifier which can unlimitedly expand its capabilities.
Specification:
INPUT VOLTAGE: 12V DC (24Volts as option)
MAXIMUM LOAD CURRENT: 4A / Channel (3 channels R, G, B)
SCENE MODES: 21 RGB modes (7 static colours mode)
GRAY SCALE: 256 LEVELS (RGB)
BRIGHTNESS ADJUST: 0 TO 256 LEVELS
SPEED ADJUSTMENTS: 100 LEVELS
PROTECTION: OVERLOAD (AUTO)
OTHER FUNCTIONS: RESTORE OF SETTINGS AFTER POWER OFF/ON
REMOTE CONTROL RANGE: 20 to 100 meters
CONTROLLER DIMENSIONS: L90 X W70 X H30 (mm)
PACKAGE DIMENSIONS: L145 X W95 X H50 (mm)
WEIGHT: 200g
To run 10 meters of RGB strip you will need a 6A switching mode power supply, an RGB controller of your choice and the flexible strip. Controller is delivered with solder-less plugs ready to connect with our RGB Led Strip (No soldering required, plug & play ready)!
To control more than 10 meters of RGB strip using just one remote control, for every extra 10 meters a 6A power supply and an RGB led amplifier is necessary (LT-System-3060 or HL-AH3H10).
HL-AH3H10 (RGB led amplifier) is a low version of an RGB amplifier but in order to get synchronized with the wireless RGB controller (or additional rgb amplifiers) will need an extra cable connecting negative of all power supplies used!
Using LT-SYSTEM-3060 rgb led amplifier, does not require any extra connections.
Product Brochure Warning! Large file size. Depending on your connection, the page may be slow to open.
Alternatively you can right click here and choose "Save Target As".
Note: Similar dimmable led controller (led dimmer) already available for single color led applications; for more info please check out the following link:
http://www.hiline-lighting.com/pd-wireless-single-colour-led-strip-dimmer.cfm
