|
RGB AMPLIFIER FOR LED STRIP LIGHTING
The RGB Amplifier is used to increase load capability for the wireless RGB Controller HL-CWH3H10-B.
An RGB Led amplifier is necessary for every additional 10 meters of RGB Led strip flexible lighting.
Powered by additional 12VDC power supply (not included); we strongly suggest using only switching mode power supplies with any Led application (Models: PSU-50W-12V or PSU-60W-12V).
Installation notes:
Input & output connections:
The four pins connection port (12V power plug side) is the RGB input side and the six pins connection port is the RGB output side that you will connect the RGB Led strip.
Common power Supply:
The positive and negative cables of the RGB controller and amplifiers must be paralleled if they share a common power supply! This will make sure that the colours of the LED strips will be synchronized.
Separate power supplies:
If you use separate power supplies (one for the RGB controller and extra supply for every amplifier) you will need to connect the negative cables of all the power supplies together. This will make sure that the colours of the LED strips will be synchronized.
Specification:
INPUT VOLTAGE: 12V DC
INPUT/OUTPUT LOAD: MAXIMUM OF 10A
LOAD CURRENT: 2.5A / Channel (3 channels R, G, B)
DIMENSIONS: L65 X W93 X H24 (mm)
WEIGHT: 250g
Warning! Large file size. Depending on your connection, the page may be slow to open.
Alternatively you can right click here and choose "Save Target As".
Click here for Frequently asked Questions on this product
|
