Member of
Its small size, cool light output and modular design give it flexibility in installation into confined spaces such as pelmets, coffers and coves.
The 100 to 120 degrees wide angle beam ensures that the surface being illuminated is bright and even. The self adhesive backing tape (Brand: 3M) also lends itself for use in furniture, room and lighting/display design.
One meter of RGB LED strip produces equivalent light output to a 35w halogen lamp. Using the appropriate led controller it is possible to adjust the brightness of the led without any flickering (not all led controllers are capable for led dimming).
Installation Tips:
RGB Led strip is a 4 wire common anode polarity product.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the ribbon and must be adhered to. The smallest workable segment of the RGB Strip is 100mm long and contains 3 full colors LEDs.
The Ribbon may be curved around small radii provided there are no LED components on the bend and the force does not crease the ribbon.
The Ribbon should be secured down immediately to avoid cyclic fatigue and breakage.
It is advised to use a wrist strap during soldering to remove any static electricity. Static electricity may damage the LEDs and other Ribbon components!
Note:
Warning! Large file size. Depending on your connection, the page may be slow to open. Alternatively you can right click here and choose "Save Target As".
Solar Energy
Link Directory
