|
Input Voltage: DC-12V Only!
Output Power: From 1 to 216W (Dimmable)
Can safely drive up to 10 meters of RGB Led Strip or 30 meters of single colour
Load current: 4A per Channel (6A Maximum) X 3 Channels
DMX addressing: Up to 512 (Can only be modified by DMX address editor, sold separetely)
Default DMX Channel: 1 (Can be modified by separately sold DMX Address Editor)
Output resolution: 256 steps (8 Bid - no flickering during dimming!)
Dimensions: L72 X W38 X H26 (mm)
Weight: 0.1Kg
Product Description
This dmx dimming LED Power controller is a perfect solution for 12 Volts installations of DMX controlled Led products. Excellent dimming (0-100%) is achieved via 8 bid PWM, 256 steps brightness led control for every channel without flickering! Stand alone operation is also available (build in colour changing combinations activated when no DMX signal is present). All you need to do is to power on the controller (12V) and connect it with the DMX programmer, assign the required DMX address in advance and then disconnect and install the controller with the rgb led strip; the preset dmx address will remain stored (no power necessary). This controller can only be used with 12 volts rgb led strip lighting; available are 3 channels of 6Amps each (suggested not to exceed the 4A per channel) that can be individually controlled by DMX512 control signal.
| 
