This is an RGB DMX 512 decoder /controller; uses advanced micro-chip control technology, it converts DMX512 signal to drive "analog" Led Strips. Has 3 output channels, 256-level brightness control. Can be connected with a DMX based output/console or any intelligent DMX building module and decode DMX signals to control led strips. Can also be used without DMX512 using the built-in programs.

Compatible with DMX512/1990
 
256-level brightness, full-color control 
   
3 X RGB Channel, 5A max. each
   
256 grey level, no flickering due to PWM
   
5 built-in color-changing programs
   
Can drive 1 to 3 channel of led strips
   
DMX start address setup
     

Dimensions(L*W*H): 178.0*41.1*32.7mm
     
Channel: 3
 
Input Signal: DMX-512/1990 digital signal
 
Output Signal: 0~100% PWM dimming signal, can drive 5A(Each CH.)
  
Power Supply: DC12V/24V
   
Power Output: <200W
   

Package Includes the following:

1 x main DMX Controller module
1 x RJ-45 cable(2m)
1 X 4-pin male and female connector for RGB LED strip
1 x DC connector

Notes:

DMX RGB Led controller can decode dmx-512 signal from any console or intelligent lighting module based on dmx512; can drive 3 channels of RGB Led strip or any similar constant voltage product.

• Can drive up to 20 meters of RGB Led Strip (150Leds/5 meters reel).

• Can drive up to 10 meters of RGB Led Strip (300 Leds/5 meters reel).

• DMX-512 input connection is by RJ45 plug; you may simply much the 3 dmx wires coming out from the RJ45 with an XLR 3 pins or 5 pins plug or whatever plug your application may use. Its a very simple procedure and a connection diagram is printed into the controller it self.

Product Reviews

Write an online review and share your thoughts.