DMX512 LED Controller
Compatible with colour temperature Led Strips
Overview:
The controller uses microcomputer control chip, is used to control colour temperature adjustable LED strips by regulating the color temperature between warm and cool white. Can be controlled by DMX512/1990 standard protocol, for simple and convenient centralized control; or by using the supplied remote.
Technical parameters:
1. Operating temperature: 20 to 60 Celsius
2. Supply voltage: DC12V/24V
3. Output: 3-Channels
4. Connection: Common Anode
5. DMX Connection Protocol: DMX512/1990
6. Gray scale output: 256 steps
7. DMX Channels: 5CH (white, warm white, c/w, strobe, speed);
8. Package size: 218*163*73mm
9. Gross Weight: 473G
10. Static power consumption: < 1W
11. Output Current: < 6A (Per Channel)
12. Output Power: 12V: < 216W, 24V: < 432W
DMX start address up to Channel 36 (5 dip switches)
DIP Switches available: 6 (1 to 5 is for DMX512 addressing or manual selection of build in program & 6 for remote control operation)
How to use multible led controllers and set master/slave function:
To set the master controller for remote control operation move DIP switch 6 to On possition
To set any other controllers as "slave" move DIP switch 1 to On possition (DIP Switches 2 to 6 must be Off)
Use remote control or "hand knops" and all "slave" controllers will follow the master controller
Remote control Key instruction:
ON/OFF: power on; power off
Mode: to choose light output mode
mode1: warm white all on
mode2: pure white all on
mode3: warm white and pure white all on
C+: cool white brightness up
C-: cool white brightness down
W+: warm white brightness up
W-: warm white brightness down
CW+: cool white and warm white brightness up
CW-: cool white and warm white brightness down
Notes:
1. Connect CH1 output of controller with "Pure White" mark of colour temperature adjustable Led Strip
2. Connect CH2 output of controller with "warm white" mark of of colour temperature adjustable Led Strip
