|
COOL WHITE DIGITAL LED STRIP
Length & Width(mm): 5000 X 12
LED Qty: 270
4 -Wire connection
Light Output (mcd): 270 X 1200
Light Output (lumen): 540
Beam Angle (degrees): 120
Voltage: 12
Current (Amps): 1.8 ~ 2
Max. Power Consumption (W): 24
Description:
Equipped with a type of built-in microchips which enable constant current. Thus the LEDs long life spam and color consistency can be maintained.
Will be able to produce a couple of white color sequences, chases and flash effects (effect can be set using a remote control).
It will be as easy to light up and install as our standard single colour flexible strip lights. Can be cut every 9 LEDs (170mm) and will have the 3M double-sided tape on the backside.
To do the various effects, Digital strip will need a special led controller and a power supply (both items sold separately).
Using the special controller it will enable any of the following effects:
Dot chasing, rolling, advancing, replacing, strobe and more ...
SC-W4C Controller Versions:
SC-WC4 Vs Digital Led Strip Length
SC-WC4-A for 5-10m
SC-WC4-B for 10-20m
SC-WC4-C for 20-40m
SC-WC4-D for 40-60m
SC-WC4-E for 60-80m
SC-WC4-F for 80-100m
* From the Led controller to the digital strip 4 wires will be required for any configuration*
Led Controller Key details
Key A: Mode (total 9 modes)
Key B: Speed +
Key C: Speed -
Key D: power on/off
There are 9 pro-set modes for the controller.
1) Individual LED dot runs in come-and-go way
2) 3 groups of LED dots run in come-and-go way
3) LED lighting dots move orderly to the ribbon end from the start, then run back
4) LED lighting dots move orderly to the ribbon start from the end side, then run back
5) Individual LED dot jumps every one LED
6) Flashing LED lighting dots move orderly to the ribbon end from the start, then run back
7) 3 groups of flashing LED dots run in come-and-go way
8) Strobe lighting mode
9) Static light on
* COOL WHITE DIGITAL LED STRIP Sold per 5 meters reels*
|
